Quartz Cuvettes & Flow Cells
A precision quartz sample holder used in spectroscopy and flow-based analytical instruments, specified by optical path length rather than general window dimensions.
Share requirements, quantities and a drawing if available. Specifications and supply terms require confirmation.
Overview
A quartz cuvette or flow cell is a precision sample-holding component used in absorbance, fluorescence and other spectroscopic measurements, and in flow-based analytical instruments such as flow cytometers. Unlike a general optical window, the defining specification is optical path length and internal volume, not just outer dimensions — because these directly determine the accuracy of the measurement the instrument makes. UV-grade quartz is used specifically so the cell itself does not absorb in the wavelength range being measured. Procurement review should center on matching optical path length and fluid-interface geometry in spectroscopy sampling.
Key Selection Points
- UV-grade quartz avoids absorbing in the wavelength range being measured, unlike standard glass
- Specified by optical path length and internal volume, matching analytical instrument requirements
- Used across spectroscopy, flow cytometry and general analytical instrumentation
Applications
Quartz cuvettes and flow cells are used in UV-Vis absorbance spectroscopy, fluorescence spectroscopy, flow cytometry and general analytical-instrument OEM assemblies where a verified, low-absorbance sample holder is required.
Structure & Configuration
This module describes the physical configuration and interfaces that distinguish the product from a generic optic. For Quartz Cuvettes & Flow Cells, the module focuses on matching optical path length and fluid-interface geometry in spectroscopy sampling.
- Use a labeled cross-section or configuration drawing with clear datums.
- Separate optical clear zones from mounting, sealing and handling surfaces.
- Include dimensional and inspection requirements with the enquiry for feasibility review.
- Product-specific review: connect optical path length with quartz grade and document the trade-off against a simple quartz vessel.
Prepare a product-specific enquiry
Include the requirements you know and identify any points that need confirmation.
| RFQ input | What to provide |
|---|---|
| Input 1 | Procurement objective for Quartz Cuvettes & Flow Cells: matching optical path length and fluid-interface geometry in spectroscopy sampling. |
| Input 2 | Lock optical path length before requesting a decision on sample volume and port layout. |
| Input 3 | Describe quartz grade and the mating or operating condition for flow, cleaning and sealing conditions. |
| Input 4 | Do not omit this product-specific point: provide instrument interface, beam height, fluid ports, sample compatibility and cleaning method. |
| Input 5 | Include quantity and project phase; MOQ, stock and lead time are confirmed during quotation. |
| Input 6 | Identify drawing revision, critical notes and evidence needed at acceptance. |
Frequently Asked Questions
What is the difference between a cuvette and a flow cell?
A cuvette holds a static sample for a single measurement; a flow cell has inlet/outlet ports so a fluid sample can pass through continuously, as in flow cytometry.
Can you supply a custom path length or window configuration?
Quartz Cuvettes & Flow Cells requires this decision to be tied to optical path length and sample volume and port layout. Share your drawing or exact specification through the RFQ form and we will confirm feasibility.
Which specification should be fixed first for Quartz Cuvettes & Flow Cells?
Begin with optical path length. It determines how sample volume and port layout and quartz grade should be evaluated before the mechanical details are finalized.
When is Quartz Cuvettes & Flow Cells a better fit than a simple quartz vessel?
Choose between them by testing the requirement for matching optical path length and fluid-interface geometry in spectroscopy sampling. If that requirement is absent, the comparison product may provide a simpler procurement path.
What should an RFQ for Quartz Cuvettes & Flow Cells include?
Provide instrument interface, beam height, fluid ports, sample compatibility and cleaning method. Also include quantity, drawing revision and the required acceptance evidence. Final availability is confirmed during quotation.
Related Products & Resources
Fused Silica Optical Windows
View product →
UV Quartz Sleeves
View product →
Fused Silica Lenses
View product →Explore Related Resources
Tell us what you are sourcing.
A product name, a specification or an application is a starting point.